Skip to content

QR codes on property signs, from listing to sale

One sign, many homes: size a QR code to be read from the pavement, change where it leads for each property, and see how often passers-by scan it.

Why a QR code belongs on a for-sale sign

People see a for-sale or to-let sign at moments when the agency is closed: walking the dog, waiting at a light, coming home in the evening. What they want right then is simple: photos, the price, the floor plan, a way to book a viewing. A phone number asks them to call. A QR code lets them see the listing on the spot, and come back to it later.

There is one catch. A sign is not printed for a single property. It goes up, comes down, waits in a storeroom, and goes up again in another street. A code that points straight to one listing is wrong the first time the sign moves.

One sign, many properties: change the destination, not the sign

The answer is a code whose destination you can change after printing. The printed pattern holds a short link, and the link decides where the phone goes. When the sign moves to a new property, you update the destination in a minute, and the same board carries on.

A few habits make this work over the years:

  • Give each physical sign its own code, and write a small number on its edge or back, such as “Sign 07”, so you always know which code to update.
  • Keep a simple log: which sign stands at which address, and since when.
  • Update the destination on the day the sign goes up, not the week after.
  • Once the property is sold, don’t leave the code on a listing that the portal has taken down. Send it to a “sold” page, your other listings or a valuation request.

Size the code for the pavement

Distance decides size. A common rule of thumb: the side of the code should be about one tenth of the distance it is read from. A sign on a front fence, read from the pavement 3 metres away, needs a code of about 30 cm. A sign on a balcony read from 6 metres would need 60 cm, which rarely fits: a second, smaller sign at eye level by the gate often works better.

The content of the code matters too. A code that holds a short link has fewer, bigger squares than one that holds a long web address. With an l-k.io short link, a code reads from about 1.3 times further away than a long-address code of the same size, which counts when people stand on the other side of a hedge.

Then check for real: print a proof at full size and scan it from the pavement with two or three phones, in daylight and at dusk. Our checklist for testing before you print covers the details.

Built for the outdoors

Signs live outside, in rain, sun and dirt, and they collect the odd scratch from a ladder or a car door. QR codes carry error correction: spare data that lets a phone read a damaged code. At the maximum level, a code still reads with up to 30% of its surface damaged. For an outdoor sign, that margin is worth having.

  • Print a dark code on a light background, with strong contrast. Many phones struggle with light codes on dark backgrounds.
  • Prefer a matt finish to gloss, which reflects the sky and street lights.
  • Keep the empty margin around the code free of text, frames and logos.
  • Send your sign maker a vector file, such as SVG, so the code stays sharp at any size.

Tell people what they will get

A bare code leaves people guessing. A short line next to it does the job: “Scan for photos and the floor plan” or “Scan to book a viewing”. Make it big enough to be read from the same distance as the code.

The page it opens matters just as much. It will be read on a phone, outdoors, often with one hand. Put the photos first, then the key facts, then one clear button to call or book. A heavy brochure file is a poor first step on a mobile connection.

Follow the scans of each sign

Because each sign has its own code, its scans tell you something useful: how many people looked at this property from the street, on which days, and on which phones. A sign that gets scans every weekend is doing its job. One that never does may be badly placed, hidden by a hedge or simply too small.

Lumberjack statistics show the date, country, device type, system, browser and language of each scan. No IP address is kept and no cookie is set on the links, so the neighbours walking past are not tracked.

Your next sign, step by step

A sign printed this way can serve for many sales. Here is the order that works:

  1. Create one code per sign, holding a short link, with maximum error correction.
  2. Size it at about one tenth of the reading distance and add a line saying what the scan opens.
  3. Send a vector file to the sign maker, then scan a printed proof from the pavement.
  4. Point the code to the listing on the day the sign goes up.
  5. After the sale, send it to a sold page or your other listings, then to the next property when the sign moves.

Frequently asked questions

Can I reuse a sign that already carries a QR code?

Only if that code holds a link whose destination you can change. If it holds the listing’s address directly, it cannot be updated: cover it and add a new code.

What happens to the code if the sign stays in storage for a year?

With Lumberjack, a code is never switched off when an offer ends. It is kept for at least 20 years, and as long as it is used, so the sign is ready for its next property.