Skip to content

How big should a printed QR code be?

Module size, quiet zone and scanning distance: how to choose the size of a printed QR code, and why a short link gives a code that is easier to scan.

Updated

What a QR code is made of

A QR code is a grid of small squares called modules. The standard (ISO/IEC 18004) defines 40 sizes, called versions: version 1 is 21 × 21 modules, and each version adds 4 modules per side, up to 177 × 177 for version 40.

Around the code, the standard requires a quiet zone: an empty margin 4 modules wide. Without it, phones struggle to find the code.

Size for the scanning distance

A common rule of thumb: the side of the code should be about one tenth of the distance it is scanned from. Read from 30 cm, a code of 3 cm is usually enough; on a poster read from 3 m, aim for 30 cm.

Another rule of thumb: keep each module at least 0.4 mm wide. A version 3 code (29 modules, plus 4 on each side for the quiet zone) then needs at least about 15 mm.

This is a starting point, not a rule of the standard: test with real phones at the real distance.

Why a short link makes a better code

The more characters a code holds, the more modules it needs. A long web address needs a larger version, so at the same printed size each module is smaller and harder to read.

A short link like l-k.io/abc123 fits in a small version: fewer, bigger modules at the same printed size, which scan faster and from further away.

The same QR code, made two ways: regular address, 41 × 41 squares; Lumberjack link, 29 × 29 squares. At the same size, the Lumberjack link is scanned from 1.3 times farther, or by a less precise camera.

Before you print

Print a proof at the real size and scan it with two or three phones, in the light where it will hang.

  • Keep the quiet zone empty: no text, frame or picture inside it.
  • Don’t stretch the code: keep it square.
  • On packaging and labels, leave room for the code to be at least as big as your test shows.